Description
The 36V Brushless | 2 Piece Combo Pack KC36DBDL2(HRZ) from HiKOKI is the ultimate power solution for your drilling and driving needs.
It includes the DV36DA 36V Brushless Impact (Hammer) Driver Drill and the WH36DC 36V Brushless 1/4" Impact Driver, both featuring high-performance brushless motors. The pack also includes 2 x MultiVolt batteries for long-lasting power, a UC18YSL3 Rapid Charger with cooling and USB port for quick and convenient charging, and a stackable case for easy storage and transportation. Get the power you need with this comprehensive combo pack.
Combo Pack includes:
- 1 x DV36DA 36V Brushless Impact (Hammer) Driver Drill
- 1 x WH36DC 36V Brushless 1/4" Impact Driver
- 2 x 36V (5.0Ah) / 18V (2.5Ah) MultiVolt Batteries
- 1 x UC18YSL3 Rapid Charger with cooling & USB port
- 1 x Stackable case
Warranty:
- Each Tool includes 3 Years Standard Warranty with an additional 3 Years when registered online*. Click here to register.
- *Each tool in a combo kit must be registered individually.
Specifications
DV36DA 36V Brushless Impact (Hammer) Driver Drill
| Capacity | Masonry | 20mm |
| Wood | 102mm | |
| Steel | 16mm | |
| No load speed | 0 - 500 / 0 - 2,100 (min-1) | |
| No load impact rate | 0 - 31,500 (min-1) | |
| Max. torque | Hard | 138Nm |
| Soft | 64Nm | |
| Weight | 2 kg (without battery) | |
| Length | 204mm | |
WH36DC 36V Brushless 1/4" Impact Driver
| Capacity | Small screw*¹ | 4 to 10 mm (5/32" to 3/8") |
| Ordinary bolt | 5 to 18 mm (3/16'' to 23/32'') | |
| High tension bolt | 5 to 14 mm (3/16'' to 9/16'') | |
| Self drilling screw | 3.5 to 6 mm (1/8" to 1/4") in diameter | |
| Tightening torque*² | Power mode | 215 Nm |
| Bolt mode | 215 Nm | |
| Soft mode | 76 Nm | |
| No-load speed (with a battery fully charged at 20°C) | Power mode | 0 to 3,400 min-¹ |
| Bolt mode | 0 to 2,900 min-¹ | |
| Bolt single mode | 0 to 2,900 min-¹ | |
| Soft mode | 0 to 900 min-¹ | |
| Self drilling screw mode | 0 to 3,700 min-¹ | |
| Impact rate (with a battery fully charged at 20°C) | Power mode | 0 to 4,100 min-¹ |
| Bolt mode | 0 to 4,100 min-¹ | |
| Bolt single mode | 0 to 4,100 min-¹ | |
| Soft mode | 0 to 2,000 min-¹ | |
| Self drilling screw mode | 0 to 2,200 min-¹ | |
| Drive | 6.35 mm (1/4”) bit holder | |
| Type of switch | Variable speed trigger switch with forward/reverse changeover lever (with brake) | |
| LED light | White LED (Always ON, Light only SW-ON, and Always OFF) | |
| Weight | 1.6 kg | |
| Dimensions (L x H ) | 114 x 241 mm | |